uedbet体育

Product Categories

LEP-800 Liquid Evaporator

  • Technical Parameters
  • Detailed Description
  • Video show
  • The standard configuration
  • Option

model

LEP-800

rated power

1500W

Rated voltage

AC 220V 50 / 60Hz

Resistance wire heating maximum temperature

800 ℃

Heating belt maximum temperature

200 ℃

Recommended heating rate

Less than 30 ℃ / min

Temperature control method

Fuzzy PID control and self-tuning adjustment, intelligent 30-segment programmable control

Temperature control accuracy

± 1 ℃

Gas flow control system

Gas flow rate is controlled by float flowmeter

· Range: 0-500mml / minute (adjustable)

· Two stainless steel needle valves are installed on the panel to control gas in and out

· Air outlet size: 6mm OD

application

· This system can be connected with all our tube furnaces and CVD systems

· Optional heating tape can be wound around the externally connected pipe to ensure that the liquid vapor will not liquefy during the transmission process

Heating element 1

Electric heating belt (for insulation)

Heating element 2

Resistance wire (resistor wire for heater)

Dimensions (length x width x height)

350x250x (300 ~ 500 adjustable) mm

Equipment net weight

About 8 KG

LEP-800 liquid evaporator

LEP-800 is a special system for introducing liquid in CVD experiments in the laboratory. The liquid flow is controlled by a peristaltic pump. After the liquid is introduced into the gas mixing system by the peristaltic pump, it is heated by a heater The steam is then brought into the furnace tube by hydrogen, nitrogen or argon as a carrier gas output from the gas supply system. LEP can export a variety of liquids, such as: H2O, CH5OH, TiCl4r, SiHCl3, and Zn (C2H5) 2, and a variety of organic compounds. This equipment is widely used in various CVD, catalytic reactions and activation experiments using non-corrosive liquid source steam.

Detailed technical parameters

model

LEP-800

rated power

1500W

Rated voltage

AC 220V 50 / 60Hz

Resistance wire heating maximum temperature

800 ℃

Heating belt maximum temperature

200 ℃

Recommended heating rate

Less than 30 ℃ / min

Temperature control method

Fuzzy PID control and self-tuning adjustment, intelligent 30-segment programmable control

Temperature control accuracy

± 1 ℃

Gas flow control system

Gas flow rate is controlled by float flowmeter

· Range: 0-500mml / minute (adjustable)

· Two stainless steel needle valves are installed on the panel to control gas in and out

· Air outlet size: 6mm OD

application

· This system can be connected with all our tube furnaces and CVD systems

· Optional heating tape can be wound around the externally connected pipe to ensure that the liquid vapor will not liquefy during the transmission process

Heating element 1

Electric heating belt (for insulation)

Heating element 2

Resistance wire (resistor wire for heater)

Dimensions (length x width x height)

350x250x (300 ~ 500 adjustable) mm

Equipment net weight

About 8 KG



online service
  • After sales service After sales service
  • Product consultation Product consultation
  • Product consultation Product consultation
support hotline
  • 4008-051-061
Only focus can be professional
Sales Hotline: 4008-051-061
025-83111681
025-83693678
13913006686
15190487889
After sales phone: 15850763891
Technical support: 13611581149
Company Fax: 025-83111571
"Sweep code and pay attention to discounts"
捕鱼大作战---首页_欢迎您 JJ干瞪眼,欢乐干瞪眼,天天干瞪眼,干瞪眼玩法规则 JJ干瞪眼-首页 ope体育 传统足彩_竞彩网