uedbet体育

Product Categories

VTL1200 vertical distillation tube furnace

  • DSC_0510.jpg
  • Technical Parameters
  • Detailed Description
  • Video show
  • The standard configuration
  • Option

Detailed technical parameters

model

VTL1200-I

VTL1200-II

VTL1200-III

power

3.5 KW

3.5KW

3.5KW

Furnace tube size

Dia 60 (OD) X800 mm

Dia60 (OD) X1000mm

Dia80 (OD) X1000mm

Overall dimensions (mm) 495X370X1070 545X420X1070 545X420X1070

voltage

220V

Phase

Simplex

Heating element

点击进入资料下载 Swedish Kanthal A1 imported resistance wire (resistance wire can be guaranteed for 2 years) Click to enter the data download

control method

Use Yudian program temperature control instrument (standard)

1. 30-segment program temperature control intelligent PID adjustment.

2. With over-temperature protection, the electric furnace heating circuit will be automatically cut off when the temperature is too high or the temperature is broken. ON, the ON light on the panel is off, the OFF light is on, and the electric furnace is limitedly protected).

3. With 485 communication interface (standard with optional software)

4. It has a power failure protection function, that is, when the furnace is powered on after the power is turned off, the program does not start from the initial temperature, but starts from the furnace temperature when the power is turned off.

5.The meter has the function of temperature self-tuning

(Replacement of imported instruments requires additional payment, purchase)

FP93 temperature control instrument (Japan Shiden) Eurometer instrument touch screen instrument

Furnace material

1. High-quality high-purity alumina polycrystalline fiber curing furnace formed by vacuum suction filtration.

2. Molded by Japanese technology.

3.The spacing and pitch of the resistance wires in the furnace are all arranged according to the best thermal technology in Japan, and the temperature field is simulated by thermal software.

control precision

+/- 1 ℃

trigger

Phase shift trigger

Electrical appliances

Zhengtai

Thyristor

106 / 16E Simmonk, Germany

Maximum temperature

1200 ℃

Rated temperature

1100 ℃

Heating rate

≤30 ℃ / Min (can be modified according to requirements)

Recommended heating rate

≤15 ℃ / Min

Thermocouple model

K type

Heating section length

420mm

Vacuum system

1.Single- stage pump TW-1.5A 2.Double-stage pump 2XZ-2 3.VS -0.1 vacuum system

4. VS high vacuum system 5. Constant pressure pump 6. British PCG550 (INFICON) capacitance vacuum gauge

1. Generally use a rough vacuum to drive the gas out of the furnace tube: TW-1.5A single-stage pump can be used.

2. The two-stage pump 2XZ-2 vacuum pump can draw the vacuum degree of the tube furnace tube to about 10Pa.

3. The VS-0.1 vacuum system can draw the vacuum degree in the tube furnace tube to 0.1Pa (with a resistance vacuum gauge display).

4, VS high vacuum system (this system is composed of molecular and mechanical pump) can draw the vacuum degree in the tube furnace tube to 10 -3 Pa.

5. Constant pressure pump (This system can control the pressure in the tube at -100.0KPa ~ 100.0KPa).

6. British (INFICON) capacitance vacuum gauge (measurement range 3.8x10-5 -1125 Torr, can detect various gases, including mixed gas, accurate measurement, good repeatability, optional anticorrosion type PCG554)

Vacuum flange at the lower end

1. In order to increase the pumping rate and achieve higher vacuum requirements. Can replace the original hose connector with KF-25 interface (VS-0.1 and VS high vacuum system interfaces are KF25)

如用于供气系统,可将原有软管接头更换成Φ6.35mm 双卡套接头 . 2.If it is used in the air supply system, the original hose connector can be replaced with a Φ6.35mm double card sleeve connector .

Upper vacuum flange Picture keywords

Furnace plug, material placement

Furnace plug, material placement picture

Ambient surface temperature

≤45 ℃

1.Swedish Kanthal A1 resistance wire

Kanthal A1 Raw Silk Domestic Resistance Wire Furnace Imported Resistance Wire Furnace

(1), the surface temperature can reach 1420

(2) The surface is stainless steel (very bright, pay attention when customers identify it), will not rust, and will not drop slag even if it is used for a long time.

(3), Kanthal resistance wire data download

(4) Kanthal resistance wire website: www.kanthal.com

(5), resistance balance, temperature field balance is good

Fe-Cr-Al Alloy doped by Mo resistance wire produced by Shougang used by most manufacturers Kanthal A1 resistance wire has uniform resistance and balanced heat generation

Sometimes the resistance is unbalanced, part of the heat is large and part of the heat is small.

2. Installed air switch and leakage protector:

When the circuit is over-current or leakage, the meeting will be disconnected automatically.

3.Can connect with computer

The furnace is equipped with a communication interface and software, which can directly control various parameters of the furnace through a computer, and can observe the PV and SV temperature values on the furnace and the operation of the instrument from the computer. The actual heating curve of the furnace will be drawn by the computer in real time And can save the temperature data at each moment, you can call up at any time

Furnace

1. High-quality high-purity alumina polycrystalline fiber curing furnace formed by vacuum suction filtration.

2. Molded by Japanese technology.

3.The spacing and pitch of the resistance wires in the furnace are all arranged according to the best thermal technology in Japan, and the temperature field is simulated by thermal software.

4. Adopting 4 weeks heating, the temperature field is more balanced

5. Optional UL certified electrical board (all imported electrical appliances that passed UL certification)

6, certification

7, flange

Hinged flange (optional) Flange that can be connected to resistance vacuum gauge and KF25 bellows (optional) Water-cooled flange (optional)

8, full picture

Standard accessories

Description

Quantity

image

VTL1200 vertical tube furnace

1 set

Picture keywords

Quartz tube 60mm OD x 1000mm L

1

Picture keywords

Stainless steel lower flange

1

Picture keywords

Stainless steel upper flange 1 Picture keywords

Stainless steel stove hook

1

Picture keywords

Alumina plug

2

Picture keywords

Quartz Furnace Plug 1 Picture keywords

High temperature gloves

1 pair

Picture keywords

Quartz crucible

Each

K-type thermocouple 1 Picture keywords

COM to USB interface (optional)

1 set

Picture keywords

Manual

1 serving

Picture keywords

Software (optional)

1 serving

Gas supply system

Proton flow meter gas supply system

Float meter air supply system

Extraction system

Vacuum pump

2XZ-2

TW-1.5A

FX-16

Pfeiffer Molecular Pumps

Resistance vacuum gauge

Resistance vacuum gauge

Composite vacuum gauge

Bellows

KF25

KF40

Vacuum baffle valve

KF25

KF40

KF card holder

KF25

KF40

KF Tee

KF25



online service
  • After sales service After sales service
  • Product consultation Product consultation
  • Product consultation Product consultation
support hotline
  • 4008-051-061
Only focus can be professional
Sales Hotline: 4008-051-061
025-83111681
025-83693678
13913006686
15190487889
After sales phone: 15850763891
Technical support: 13611581149
Company Fax: 025-83111571
"Sweep code and pay attention to discounts"
捕鱼大作战---首页_欢迎您 JJ干瞪眼,欢乐干瞪眼,天天干瞪眼,干瞪眼玩法规则 JJ干瞪眼-首页 ope体育 传统足彩_竞彩网